Ex-e, Ex-ia
Kontakt Ara-El ApS
Høsten Teglværksvej 98 4690 Haslev
+45 56 28 65 50
Product features for AQ-AR Alu low thickness
AQ../AR.. Series are used to house Ex e and Ex i terminals. Maximum number of terminals changes on the base of terminals section, enclosure operating temperature and required temperature class. They are ideally suited for chemical agents environments, sea water corrosion resistance and extremes of low and high temperatures. EFE prefix is used for Ex de push button station execution and enclosure can be equipped with:
- Standard and emergency push buttons;
- Selector switches;
- Pilot lights;
- Measurement instruments;
- Electric and electronic equipment Ex de certified
Material
Aluminium with low content of copper
IP rating
IP66
Ambient temperature range
-50°C to +60°C (ATEX)
-50°C to +60°C (IECEx – up to +95°C for some “special” models)
Approvals
IMQ 08 ATEX 028X IMQ 16 ATEX 004U
IECEx IMQ 15.0002X IECEx IMQ 15.0010U
TR CU
Marking
II 2 GD
Ex e IIC Gb / Ex ia Ga IIC T(**)
Ex tb IIIC T(**) Db IP66
** T6/T85°C, T5/T100°C, T4/T135°C
Standard certificate label
Made by self adhesive UV and corrosion resistant polyester, approved by INERIS Laboratory.
Surface treatment
Standard with polyester powder coating RAL 7001
Accessories available upon request
Hinges
Drain/breather valve
Traffolyte/Stainless steel certificate label
Internal mounting plate
Earth continuity plates
Passing through earth bolt.
Product features for AQ-AR ALU high thickness
Material
Aluminium with low content of copper
IP rating
IP65
Ambient temperature range
-50°C to +60°C
Approvals
IMQ 08 ATEX 028X
TR CU
Marking
II 2 GD
Ex e IIC Gb / Ex ia Ga IIC T(**)
Ex tb IIIC T(**) Db IP65
** T6/T85°C, T5/T100°C, T4/T135°C
Standard certificate label
Made by self adhesive UV and corrosion resistant polyester, approved by INERIS Laboratory.
Surface treatment
Green colour polyurethane painting cycle RAL6003 (other colour available upon request)
Entries
Metric pitch 1.5, ANSI B1.20.1 NPT, UNI-6125
Hardware and screws
AISI304 Stainless steel external hardware and screws
Accessories available upon request
Hinges
Drain/breather valve
Traffolyte/Stainless steel certificate label
Internal mounting plate
Passing through earth bolt.
Products features for CP../CPS..
The CP../CPS.. range of enclosures, used for terminals wiring, grants Ex d or Ex e mode of protection.
Boxes are manufactured in aluminium with low content of copper and complete with threaded hubs suitable for cable glands or conduit, connection does not affect the internal void, which remains available for terminals wiring.
Internal and external screws are made of AISI316 stainless steel.
This series is taylor made on the base of customer specification, including quantity and type of operators.
Based on the customer’s needs and certificate requirements, our technical department will advise and select the most suitable combination.
These boxes are suitable for hazardous areas of industrial plants for indoor and outdoor applications.
Material
Aluminium with low content of copper
IP rating
IP66
Ambient temperature range
-50°C to +60°C (ATEX)
-60°C to +60°C (IECEx)
Approvals
INERIS 03ATEX0009
IECEx BKI 15.0002
TR CU
Marking
STANDARD
II 2 GD
Ex d IIC T(*) Gb
Ex tb IIIC T(*) Db IP66
Ex db IIC T6/T5/T4
* T6/T85°C, T5/T100°C, T4/T135°C
II 2 GD
Ex e IIC T(*) Gb
Ex t IIIC T(*) Db IP66
* T6/T85°C, T5/T100°C
Standard certificate label
Made by self adhesive UV and corrosion resistant polyester, approved by INERIS Laboratory.
Surface treatment
Painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request)
Thread
Metric pitch 1.5, ANSI B1.20.1 NPT, UNI-6125
Accessories available upon request
Internal anticondensate painting
Traffolyte/Stainless steel certificate label
Terminals
Maximum number of terminals
(15 x 2,5 mm² / 12 x 4 mm² / 8 x 6 mm²)
