Ex-d, Ex-e, Ex-de, Ex-den

efxe-rustfri

Kontakt Ara-El ApS

Høsten Teglværksvej 98 4690 Haslev

+45 56 28 65 50

ara-el@ara-el.dk

https://www.ara-el.dk

Product features for EFE

Push button stations EFE Series, made of GRP, are manufactured by using enclosure AQ../AR.. Series.
They are designed to meet the requirements for use ON and OFF-SHORE, in petrochemical and marine applications and for any other industry where an explosive atmosphere may be present.

They can be equipped with following Ex de certified components:

  • Standard and emergency push buttons,
  • Rotating switches,
  • Signalling lamps,
  • Measurement instruments.

Material
GRP (Glassfiber reinforced polyester)
IP rating
IP66
Ambient temperature range
-50°C to +60°C (ATEX)
-50°C to +95°C (IECEx)
Approvals
IMQ 08 ATEX 028X
IECEx IMQ 15.0002X
TR CU
Marking
II 2 GD
Ex de IIC T(**) Gb / Ex mb IIC T(**) Gb
Ex tb IIIC T(**) Db IP66/67
** T6/T85°C, T5/T100°C, T4/T135°C

Standard certificate label
Made by self adhesive UV and corrosion resistant polyester, approved by INERIS Laboratory.
Accessories available upon request
Hinges
Drain/breather valve
Traffolyte/Stainless steel certificate label
Internal mounting plate
Earth continuity plates
Passing through earth bolt.

Product features for CP../EFSRC..

The CP../EFSRC.. range of control stations are based on the features of our CP.. /CPS.. enclosures, offer an Ex d IIC mode of protection and they can be equipped with different components (push button, selector switches, potentiometers, signal lamps, rotary handles, ammeters, voltmeters, etc.)
Boxes are manufactured in aluminium with low content of copper and complete with threaded hubs suitable for cable glands or conduit, connection does not affect the internal void, which remains available for terminals wiring.
Internal and external screws are made of AISI316 stainless steel.
This series is taylor made on the base of customer specification, including quantity and type of operators. Based on the customer’s needs and certificate requirements, our technical department will advise and select the most suitable combination. These boxes are suitable for hazardous areas of industrial plants for indoor and outdoor applications.

Material
Aluminium with low content of copper
IP rating
IP66
Ambient temperature range
-50°C to +60°C (ATEX)
-60°C to +60°C (IECEx)
Approvals
INERIS 03ATEX0009
IECEx BKI 15.0002
TR CU
Marking
II 2 GD
Ex d IIC T(*) Gb
Ex t IIIC T(*) Db IP66
Ex db IIC T6/T5/T4
Ex tb IIIC T85°C/T100°C/T135°C Db IP66
* T6/T85°C, T5/T100°C, T4/T135°C

Surface treatment
Painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request).
Thread
Metric pitch 1.5, ANSI B1.20.1 NPT, UNI-6125
Accessories available upon request
Internal anticondensate painting
Traffolyte/Stainless steel certificate label
Hot deep galvanized steel or Stainless Steel AISI316 stand / canopy.

Product features for EPKZM

EPKMZ Series enclosures, made of aluminium with low content of copper RAL6003 painted, are used to house motor protector circuit breakers up to 63A.
These boxes are suitable for hazardous areas of industrial plants for indoor and outdoor applications.

Material
Aluminium with low content of copper
IP rating
IP66, IP67 with flanged joint coated with silicone grease
Ambient temperature range
-30°C to +55°C
Approvals
INERIS 02ATEX0027X
TR CU
Marking
II 2 GD
Ex d IIB T6 Gb
Ex tb IIIC T85°C Db IP66/IP67

Surface treatment
Painted by green colour polyurethane painting cycle RAL6003 (other colour available upon request)
Thread
N° 2 entries Metric pitch 1.5, ANSI B1.20.1 NPT, UNI-6125
Standard certificate label
Made by self adhesive UV and corrosion resistant polyester, approved by INERIS Laboratory.
Accessories available upon request
Internal anticondensate painting
Traffolyte/Stainless steel certificate label
Hot deep galvanized steel or Stainless Steel AISI316 stand / canopy.