FLOODlight
Kontakt Ara-El ApS
Høsten Teglværksvej 98 4690 Haslev
+45 56 28 65 50
Product features for FL
Due to the body made of aluminium with low content of copper and tempered glass, FL..
Series floodlights, provided in a wide range of wattage and power, are ideally suited for ON and OFF-SHORE applications and all kinds of industries where there is a high level of corrosion, mainly for lighting wide areas.
To increase further surface protection, upon request it is possible to apply an OFFSHORE painting cycle suitable for marine environments.
Standard floodlights are manufactured with symmetrical narrow beam reflector and symmetrical wide beam reflector upon request (ordering codes upon request).
For ease of installation and maintenance, the luminaire features an integral Ex e connection box and AISI304 stainless steel universal mounting bracket.
Material
Aluminium with low content of copper
Stainless steel AISI316L (ordering codes upon request)
IP rating
IP66
Ambient temperature range
-50°C to +55°C
Approvals
INERIS 00ATEX0023X (standard) / TR CU (marking upon request, ordering code to be
required)
Marking
II 2 GD
Ex de IIB+H2 T3 Gb
Ex tb IIIC T200°C Db IP66
Gaskets
Gasket made of Nitrile Rubber (NBR) on flat joint
Surface treatment
Painted by green colour polyurethane painting cycle RAL6003 (other colour available upon
request) / Internal anticondensate painting / AISI316L version unpainted
Entries
N° 2 entries M25x1,5
Hardware and screws
AISI316L Stainless steel screws and AISI304 Stainless steel adjustable bracket
Lamps
Included
Rated operation voltage (UE)
See table
Frequency
See table
Power factor
> 0,95
Accessories
N° 1 brass nickel chrome plated plug + N° 1 brass nickel chrome plated cable gland PNA
type c/w set of inner seals
Accessories available upon request
Protection guard (not to be sold separately unless as a spare part)
Special brackets fo pole mounting
Options upon request
HOT INSTANT RESTRIKE solution available via twin-arc lamp assuring immediate hot instant restrike
ignition with flux that will reach 80% of the nominal lamp flux in about 3 minutes.
HOT INSTANT RESTRIKE solution also available via INSTANT RESTRIKE BALLAST, assuring
immediate hot instant restrike ignition with 80% of the lamp nominal flux in 7 seconds.
(for high pressure sodium version)
Product features for FL LED
Floodlights with LED technology combine lightweight, compact design, high reliability, safety, efficiency and energy saving.
Material
Aluminium with low content of copper
IP rating
IP66
Ambient temperature range
-50°C to +55°C
Approvals
INERIS 00ATEX0023X (standard) / INERIS 01ATEX0059 (battery pack)
CoC TR CU 012/2011: n° B.01067 (marking upon request, ordering code to be required)
Marking
Standard:
II 2 GD
Ex de IIB+H2 T6 Gb
Ex tb IIIC T85°C Db IP66
Battery pack:
II 2 GD
Ex d IIC T6 Gb
Ex tb IIIC T85°C Db IP66
Gaskets
Gasket made of Nitrile Rubber (NBR) on flat joint
Entries
Suitable for LOOP-IN LOOP-OUT up to 4mm²
Hardware and screws
AISI316L Stainless steel external hardware and screws
Lamps
Included
Rated operation voltage (UE)
110V/264V (standard version)
220V/240V (emergency version)
Frequency
50 Hz / 60 Hz
Accessories
Ceiling mounting : N° 1 brass nickel chrome plated plug + N° 1 brass nickel chrome plated cable gland PNA type c/w set of inner seals.
Pole mounting : N°1 brass nickel chrome plated cable gland PNA type c/w set of inner seals.
Adjustable mounting bracket: : N°1 brass nickel chrome plated cable gland PNA type c/w set of inner seals.
Upon request: protection guard.
Operation principles
FL.. floodlight for emergency service : 180 minutes; with constant flux 650 lm (other emergency duration available upon request)
